Аппаратная подтяжка лица СМАС-лифтинг

Hardware facelift SMAS-lifting: reviews and opinions

Is there any benefit from a hardware facelift SMAS-lifting?

Hardware cosmetology is one of the best alternatives to surgical methods of rejuvenation. Non-surgical methods of facial rejuvenation are becoming more and more popular among women of all ages. According to statistics, the number of such procedures increases by 14-15% annually.

Features of SMAS lifting

Feature of hardware lifting

Already after 30 years, women begin to notice the appearance of the first signs of aging: mimic wrinkles, pigmentation. Appropriate cosmetics can cope with such defects, but how to get rid of sagging skin, restore its former firmness and elasticity? After all, no matter how well-groomed she is, sagging cheeks, eyelids and eyebrows immediately give out the true age of a woman.

Tightening the skin with a classic lifting is not enough, the effect of this method is short-term and insignificant. To significantly rejuvenate the face, it is necessary to work a little deeper – on the subcutaneous epithelium and muscles. After all, it is with their help that the frame is formed, which does not allow the oval of the face to lose its clarity.

Many beauty centers offer a wide range of aesthetic corrections for those who wish to avoid facelift procedures. The most popular and effective are hardware methods of facelift.

Types of hardware lifting:

  • Radio frequencies are a painless method. However, the effect persists for a month and a half, after which a second course is required. The procedure helps only temporarily improve the appearance of the skin, removing irregularities and fine wrinkles;
  • Laser. During the procedure, the patient feels discomfort and tingling. Most often, the laser hardware method is used to remove various skin defects: scars, scars, papillomas, and so on. This method also has a lifting effect. The tangible effect of a facelift can be assessed after 90-180 days. With the right recovery process and facial skin care, the result can last for a year and a half;
  • Ultrasound or SMAS lifting. This hardware method has been used since 2009. Only with the help of ultrasonic waves can one penetrate as deeply as through surgical intervention.

The peculiarity of hardware SMAS lifting is that it is faster and better than other methods and can increase the level of collagen production in the dermis and fatty layers of the skin. By heating the internal tissues, the waves carry out micro-massage, which saturate the muscles with oxygen. Also, with the help of ultrasound, it is possible to provide a deeper delivery of active substances that contribute to the creation of new collagen and elastin cells. During the procedure, the device stimulates protein synthesis inside the cells, which contributes to a faster metabolism and restoration of damaged cells.

Benefits of hardware SMAS lifting

The main advantages of SMAS-lifting

At the moment, hardware SMAS-lifting has no analogues. Only this procedure allows the ultrasonic beam to act at a depth of 4.5 mm, that is, right up to the frame layer of the facial muscles. If desired, hardware lifting can be combined with other anti-aging techniques to achieve maximum results.

One of the main advantages of SMAS lifting is high efficiency with minimal trauma.

The SMAS lifting device provides the most accurate focused radiation, due to which it is possible to highlight the zones of influence of ultrasonic pulses and the depth of penetration. It is not necessary to carry out the procedure on the entire face, only specific areas can be processed: eyelids, forehead, neck or chin. It is also possible to act on pronounced nasolabial wrinkles or wrinkles around the eyes.

The hardware SMAS lifting procedure is intended not only for rejuvenation of the face, neck and décolleté. You can also treat the inner surface of the thighs, stomach and arms, and the technique is also effective in the fight against cellulite.

The ultrasonic method of rejuvenation has practically no drawbacks. The recovery period is minimal. Therefore, you can spend it on any weekend, as the redness disappears in the next few hours.

Indications and contraindications

When is SMAS lifting contraindicated?

Before setting a date for the procedure, the patient undergoes an examination that will help to avoid negative consequences. As a rule, prohibitions are associated with anesthesia, which is why the hardware SMAS facelift has practically no side effects and consequences.

SMAS lifting is used in the following cases:

  • With a strong omission of the muscular-aponeurotic system of the face;
  • With the appearance of deep facial wrinkles and the allocation of nasolabial folds;
  • With early aging of the skin;
  • For preventive purposes, destructive processes in the layers of the skin, including ptosis of 1-2 degrees.

So that the facelift does not contrast too much with the skin of the neck and hands, it is recommended to carry out additional therapy to improve these areas. To obtain and maintain a uniform and lasting effect, the patient will need to visit a cosmetologist only once every few years.

The maximum age mark at which hardware lifting will be most effective is 40 years.

Contraindications to the procedure:

  • Pregnancy and lactation;
  • If the patient has a pacemaker;
  • If the patient has implanted metal implants, except for dental ones;
  • Severe diseases of the neuropsychic system, including epilepsy;
  • Diabetes mellitus and other pathologies of the endocrine system;
  • Oncology of all types;
  • Diseases of the cardiovascular system;
  • With abundant appearance of acne and acne;
  • While taking medications that affect blood clotting;
  • Lupus erythematosus;
  • scleroderma;
  • Inflammation of skin areas subject to ultrasonic treatment;
  • The presence in the body of chronic and acute diseases provoked by infections;
  • Minor age.

The course of the procedure

Stages of hardware SMAS-lifting

During the procedure, a device equipped with 2-3 sensors is used. This helps to process two layers of fabric at the same time. Using the device, you can determine the thickness of tissues and set the required depth of exposure.

The SMAS lifting procedure includes the following steps:

  • First of all, with the help of cosmetic lotions and foams, the skin of the face is cleansed of traces of cosmetics and impurities;
  • Next, the skin is treated with a special gel, which has an anesthetic effect. After half an hour, its remains must be removed;
  • Before lifting, an antiseptic treatment is performed – the skin surface is wiped with chlorhexidine;
  • With a special ruler, markings are applied to those zones that will be subjected to ultrasonic exposure;
  • A gel solution is applied over these markings, which contributes to improved transmission of ultrasonic waves;
  • FROM…

Leave a Comment

Your email address will not be published. Required fields are marked *